Hanna Instruments HI 9017 - Manual (Page 36)

36
The left display then shows "P5-2".
• press 9
• press decimal point
• press 0
• press 3
• press ENTER B.
PROGRAM #6 (HI9017)
Setting of RS232C ESC code.
E.g. ESC code is 20 (decimal).
• press 6
• press PGM.
At this stage, the left display shows "P6-1".
• press 2
• press 0
• press ENTER A.
Note: the ESC code should be between 0 - 127 decimal, the default is
16.
ENTER B . 3 0 9
pH ºC °C
6 PGM
pH
ENTER
A 0 2
pH ºC °C