3 software toolbar introduction – Hamilton Buhl LyteBoard User Manual
Page 30

Buhl LyteBoard IWB User Guide V.12/7/09
Page 30 of 43
www.buhl-ind.com
P 4-4
Notice:
1. If your pen or finger haven’t click at the center of the anchor point or wrong click or
appear next anchor point without clicking, then you need to click the “ESC” key to exit
orientation or reorientation for the next time, otherwise it is unable to make pen or
fingertip coincidence.
2. While orientation, keep the pen or fingertip perpendicular to the board as possible as
you can.
3. When the projector and Whiteboard change in the relative position , reinstall driver, or
change in the resolution of display, you need to make a new reorientation.
4.3 Software Toolbar introduction
4.3.1 Software Interface and Simple Description of functions
You’ll see the Software Interface just like the picture below, after start up Software (P 4-5)