Glow-worm Climapro2 RF - Manual (Page 9)

0020094586_01 - 08/10 - Glow-worm
- 7 -
INSTALLATION
7.2 Installing the radio receiver
Case n°1 - radio receiver on control box unit
1
2
Legend
1 Control box unit
2 Radio receiver
• Slide the radio receiver into the notches.
1
2
Legend
1 Radio receiver
2 Location of radio receiver
Case n°2 - radio receiver in the control box unit
A
B
1
2
Legend
1 Control box unit
2 Radio receiver
The receiver should be installed outside the
appliance if the appliance control box does not have
a location for the radio receiver.
Case n°3 - radio receiver outside appliance
• Determine the installation location. See the "Installation
location" chapter.
A
B
5
4
3
2
1
Legend
1 Radio receiver
2 fixing screw
3 fixing holes
4 Plugs
5 Drilling
• Position the radio receiver (1) on a wall.
• Drill the hole (5) for the fixing screw in accordance with the
fixing hole (3) on the unit or use the sticky pad if provided.
• Insert the rawlplug (4) in the drilled hole(5).
• Fix the radio receiver with the fixing screw (2).
• Respect the standards for electrical installations in force for
connecting the ebus cable between the radio receiver and
the appliance.