Glow-worm Climapro2 RF - Manual (Page 5)

0020094586_01 - 08/10 - Glow-worm
- 3 -
INTRODUCTION
INTRODUCTION
1 Instructions guidance
1.1 Product documentation
The instructions are an integral part of the Climapro2 RF and
must be handed to the user on completion of the installation in
order to comply with the current regulation.
• Carefully read the manual, to enable safe installation, use
and servicing. No liability can be accepted in the event
of damage for not complying with the guidance in this
instruction manual.
1.2 Associated documents
- User instructions
1.3 explanation of symbols
e
DANGER: Risk of electric shock.
ATTENTION: Risk of damage to the Climapro
2
RF
or to its vicinity.
IMPORTANT: Useful information.
2 Climapro
2
Rf description
2.1 Regulation and statutory requirements
CE Mark
The CE mark indicates that the appliances described in this
manual are in compliance with the following directives:
- European Directive Num. 2004-108 of the European
Parliament and the Council regarding electromagnetic
compatibility
- European Directive Num. 2006-95 of the European
Parliament and the Council regarding low voltage
- Directive relating to telecommunications equipment (Council
of the European Community directive R&TTE 99/5/CEE).
2.2 Operational Diagram
The room thermostat communicates with a control unit via a
radio receiver.
EBUS
1
2
3
4
5
Legend
1 Wall support for the Climapro
2
Rf
2 Radio receiver connected to the heating system
3 Testing heating system
4 Room thermostat
5 batteries
3 Safety instructions and regulations
3.1 Safety regulations
All work inside Climapro
2
RF must be carried out by a qualified
professional or Glow-worm’s After-Sales Service.
Climapro
2
RF must only be installed by a qualified and
responsible professional, so as to respect the applicable
regulations and rules
Respect the basic safety instructions:
• Stop the appliance.
• Cut the electrical power to the appliance.
• When work on the appliance is completed, perform an
operational test and check for safety.