Glow-worm Climapro2 RF - Manual (Page 14)

0020094586_01 - 08/10 - Glow-worm
- 12 -
INSTALLATION
• From the installer menu (see access to the installer menu) >
select on the screen > heating > modulating control
• Press to highlight your choice (On or Off) and press the
button to confirm.
10.5 Domestic hot water function
Menu This menu lets you:
Show or hide the domestic hot water
function in the end user menu
Set the maximum domestic hot water
temperature.
Enable or disable the domestic hot water
reheating program in the end user menu
10.5.1 The hot water function
This function lets you activate or deactivate the hot water menu
for the user.
If the function is deactivated, the domestic hot water
settings are adjusted via the appliance.
• From the installer menu (see access to the installer menu) >
select on the screen > hot water > on/off
• Press to highlight your choice (activate or deactivate)
and press the button to confirm.
10.5.2 Adjust the maximum domestic hot water
temperature
This function lets you adjust the maximum hot water
temperature that can be set by the user (value adjustable
between 38 and 65 °C - factory setting: 60 °C).
• From the installer menu (see access to the installer menu) >
select on the screen > hot water > maximum temperature
• Increase or reduce with the buttons to display the
desired water temperature and validate with button .
10.5.3 To enable or disable the domestic hot water
heating program
The hot water function must be activated before it
can be programmed. Depending on the appliance,
deactivation cuts off the hot water heating as well
as the production of hot water (see the appliances
installation manual).
This function makes it possible to allow the user to program
domestic hot water reheating.
• From the installer menu (see access to the installer menu) >
select on the screen > hot water > enable program
• Press to highlight your choice (enable or disable) and
press the button to confirm.