Osd interface instruction – FeiYu Tech FY-41AP User Manual
Page 26

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 24
(2)
1) Please control your aircraft fly 0.8 meters above to the ground, which will give you
a good control effect. And if you control your aircraft descend to the ground in hovering
mode may cause the aircraft altitude volatility which caused by the ground air.
2) Without the GPS module, switching to Hovering Mode or Auto Return to Launch
Mode will automatic bring you into Fixed Altitude Flight Mode.
(3) In hover mode, you can change the aircraft position by using the RC sticks.
When you release the RC sticks, the aircraft will hover to a new position.
15. OSD Interface Instruction
The integrated OSD module supports PAL or NTSC form video input.
OSD display interface
(apply to the firmware for OSD v1.20 or above version ):
No.
Instruction
No.
Instruction
1
GPS altitude(Unit: m)
10
Relative altitude (Unit: m)
2
The quantity of satellite used for
positioning
11
GPS speed (Unit: km/h)
3
Airspeed/GPS speed (Unit: km/h)
12
Flight total mileage (Unit: km)
4
The battery voltage (Unit: V)
13
Total flight time (Format:h:m:s)
5
Battery power consumed (Unit: mA/h)
14
Current course of flight (Unit: deg)