FeiYu Tech FY-41AP - Manual (Page 13)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 11
performance of Hovering mode. Regarding 41AP module installation position, the
center of the aircraft should be as far away as possible from other objects that could
cause interference. The aim is to reduce the disturbance to the internal IMU position
sensors when the aircraft tilts or rotates. In addition, you also have to consider a very
important factor: reducing the interference to the 41AP internal magnetic sensor due
to positioning during installation. There will be interference to magnetic sensor, from
surrounding objects with a strong current, motor rotation, battery, etc. Keep
potential interfering objects as far away as possible during installation. Keeping these
two factors in mind, please find a suitable position for installation. For example, you
can put the FY-41AP module on a high place.
6.2 GPS Module Install
 GPS receiver module has integrated plate type GPS passive
antenna with stronger reception ability shielding the false signal
by ground reflection efficiently. DO NOT install next to metal or carbon fiber & other
shielding material, which may block satellite signal reception. Install the GPS Module
horizontal and away from electrom
agnetic sources such as ESC‘s, power wires,
servo wires & video transmitters which can interfere with GPS signal.
Arrow forward（default direction）
Arrow towards to left Arrow towards to right
Arrow towards to back
Nose of the plane