EXFO IQS-9100 Optical Switch for IQS-500/600 - Manual (Page 93)

SCPI Command Reference
Optical Switch 87
Product-Specific Commands—Description
:STATus?
Description This query returns a value indicating the status of
the switch (READY, BUSY, etc.)
This command is an event and has no associated
*RST condition or query form.
Syntax :STATus?
Parameter(s) None
Response Syntax
Response(s) Status:
The response data syntax for is defined
as a element.
The response represents the module
state, where:
UNINITIALIZED, means the module is not
initialized.
INITINPROGRESS, means the module
initialization is in progress,
READY, means the module is ready,
BUSY, means the module is busy,
DISCONNECTED, means the module is
disconnected,
DEFECTIVE, means the module is defective, and
UNCONFIGURED, means the module is not
configured.
Example(s) STAT? returns READY (Module is ready.)