A technical specifications, Mportant, Optical switch – EXFO IQS-9100 Optical Switch for IQS-500/600 User Manual
Page 71
Optical Switch
65
A Technical Specifications
I
MPORTANT
The following technical specifications can change without notice.
The information presented in this section is provided as a reference
only. To obtain this product’s most recent technical specifications,
visit the EXFO Web site at www.exfo.com.
Model
1x2
1x4, 1x8, 1x12, 1x16, 1x24, 1x32, 2x4
f
2x2
Mode
Singlemode
Multimode
Singlemode
Multimode
Singlemode
Multimode
Insertion loss
b
(dB)
typical
0.5
0.5
0.7
0.5
0.8
0.5
maximum
1.5
1.5
1.7
1.7
1.5
1.5
Backreflection
c
(dB)
maximum
–55
–24
–55
–24
–55
–24
Repeatability
d
(dB)
maximum
± 0.01
± 0.01
± 0.03
± 0.03
± 0.01
± 0.01
Operating wavelengths (nm)
1290 to 1570
780 to 1350
1290 to 1650
780 to 1350
1290 to 1570
780 to 1350
Polarization-dependent loss
e
(dB)
typical
) 0.05
-
) 0.05
-
) 0.05
-
standard maximum
0.10
-
0.10
-
0.10
-
on request maximum
0.05
-
0.05
-
0.05
-
Maximum input power (dBm)
+24
+24
+24
+24
+24
+24
Switching time (ms)
25
25
25 per channel + 425 (debouncing)
25
25
Number of channels
1x2
1x2
1x4, 1x8, 1x12, 1x16, 1x24, 1x32
2x2
2x2
Crosstalk (dB)
–80
–80
–80
–80
–80
–80
NOTES
a. Specifications valid at 23 °C ± 5 °C.
b. Insertion loss per module, excluding connectors, measured at singlemode wavelengths of 1310 nm and 1550 nm,
and multimode wavelength of 850 nm.
c. Backreflection is measured at singlemode wavelengths of 1310 nm and 1550 nm, with APC connectors,
and multimode wavelength of 850 nm.
d. Repeatability values are for 100 cycles per switch module at constant temperature with stabilized source/meter
at singlemode wavelengths of 1310 nm and 1550 nm, and multimode wavelengths of 850 nm and 1300 nm.
e. Measured at 1550 nm. Lower polarization-dependent loss is available upon request.
f. Non-blocking.
,
,
Number of slots
1
1
2
h
3
a
5
1
2
b
Dimensions
Width
3.6 cm (1
7
⁄
16
in)
3.6 cm (1
7
⁄
16
in)
7.4 cm (2
15
⁄
16
in)
11.2 cm (4
7
⁄
16
in)
18.8 cm (7
7
⁄
16
in)
3.6 cm (1
7
⁄
16
in)
7.4 cm (2
15
⁄
16
in)
Height
12.5 cm (4
15
⁄
16
in)
12.5 cm (4
15
⁄
16
in)
12.5 cm (4
15
⁄
16
in)
12.5 cm (4
15
⁄
16
in)
12.5 cm (4
15
⁄
16
in)
12.5 cm (4
15
⁄
16
in)
12.5 cm (4
15
⁄
16
in)
Depth
28.2 cm (11
1
⁄
8
in)
28.2 cm (11
1
⁄
8
in)
28.2 cm (11
1
⁄
8
in)
28.2 cm (11
1
⁄
8
in)
28.2 cm (11
1
⁄
8
in)
28.2 cm (11
1
⁄
8
in)
28.2 cm (11
1
⁄
8
in)
Weight
0.5 kg (1.1 lb)
0.8 kg (1.8 lb)
0.9 kg (2.0 lb)
0.9 kg (2.0 lb)
1.4 kg (3.2 lb)
0.5 kg (1.1 lb)
1.0 kg (2.3 lb)
Switch life
10 million cycles minimum
Temperature
operating
10 °C to 40 °C
(50 °F to 104 °F)
storage
—20 °C to 60 °C
(—4 °F to 140 °F)
Relative humidity maximum
80 % non-condensing at 40 °C
Instruments Drivers
LabVIEW™ drivers, SCPI commands and COM/DCOM librairies
Remote Control
With IQS-500: GPIB (IEEE-488.1, IEEE-488.2) Ethernet and RS-232
Standards Accessories
User Guide and Certificate of Compliance
NOTES
a. 2 slots for MU/UPC connectors
b. 1 slot for MU/UPC connectors
c. 2xN configurations available only with 2- and 4-channel options.
d. Singlemode only.
e. Multimode only.
f. Available on 1x2, 1x4, 1x8, 1x12, 1x24, 2x2 and 2x4 switches.
g Available for singlemode units. Not with FC/APC, SC/APC or MU/UPC connectors.
h. 1x12 switches w/ EUI connectors use 3 slots.