EXFO IQS-9100 Optical Switch for IQS-500/600 - Manual (Page 38)

Operating the Optical Switch
32 IQS-9100
Selecting Configurations with the 1 x n Model
Note: You can change the output port at any time, and as many times as you
want. You cannot preset output switch port activation sequences from the
control application with 1 x n optical switches. You must activate each port
manually.
Following are some of the modules that match the 1 x n model (1 x 2, 1 x 4,
1 x 8 and, 1 x 32 models shown. 1 x 12, 1 x 16 and 1 x 24 models also
available).
You can also select a configuration from the QuickTools utility. For details,
see Monitoring Optical Switch Modules on page 45.