EXFO IQS-9100 Optical Switch for IQS-500/600 - Manual (Page 39)

Operating the Optical Switch
Optical Switch 33
Selecting Configurations with the 2 x 2 Model
Selecting Configurations with the 2 x 2 Model
The 2 x 2 optical switch model offers two configurations:
³
Bypass mode
³
Insert mode
To select a configuration with the 2 x 2 optical switch model:
³
Click Bypass Mode or Insert Mode, according to the configuration you
want to use.
You can also select a configuration from the QuickTools utility. For details,
see Monitoring Optical Switch Modules on page 45.
Note: For the 2 x 2 model, the Continuity function is not available in the Control
Center.