EXFO IQS-9100 Optical Switch for IQS-500/600 - Manual (Page 44)

Controlling Multiple Optical Switch Modules
38 IQS-9100
Selecting Modules to Control
Selecting Modules to Control
Before you can modify the module parameters, you must specify which
modules you intend to use.
To select IQS-9100 Optical Switch modules:
1. On the Modules/Config function tab, select the boxes corresponding
to the modules you want to control.
OR
Click Select All if you want to work with all IQS-9100 Optical Switch
modules.
2. Click Apply Selections and click the Instruments function tab.
Select or
deselect a
specific
module
Select all or
select no
modules