EXFO IQS-2100 Light Source for IQS-500/600 - Manual (Page 70)

SCPI Command Reference
64 IQS-2100
Product-Specific Commands—Description
:SOURce[1..n]:POWer:STATe
Description This command turns the optical source on or off.
When source is on, the red LED (Active) on the
front of the instrument lights up.
*RST sets the optical source to OFF.
Syntax :SOURce[1..n]:POWer:STATe
e>
Parameter(s) PowerState:
The program data syntax for is
defined as a element.
The special forms ON and OFF
are accepted on input for increased readability.
ON corresponds to 1 and OFF corresponds to 0.
The parameter is the new power
state of the source.
Example(s) SOUR:POW:STAT ON
Notes Instrument must be in the Ready state to execute
this command.
See Also SOURce[1..n]:POWer:STATe?