EXFO IQS-2100 Light Source for IQS-500/600 - Manual (Page 64)

SCPI Command Reference
58 IQS-2100
Product-Specific Commands—Description
:SOURce[1..n]:AM:INTernal:FREQuency
Description This command selects the internal modulation
frequency. The internal modulation is 50 % duty
cycle at the selected frequency.
*RST sets the modulation frequency to 0 Hz
(CW).
Syntax :SOURce[1..n]:AM:INTernal:FREQuency
HZ]>
Parameter(s) ModulationFreq:
The program data syntax for
is defined as a
DATA> element followed by an optional
element. The
allowed element is
HZ.
The parameter is the new
modulation frequency: 270, 1000, 2000, or 0
(CW).
Example(s) SOUR:POW:STAT ON
SOUR:AM:INT:FREQ 2000Hz
See Also SOURce[1..n]:AM:INTernal:FREQuency?