EXFO FOT-5200 Coarse Spectrum Analyzer - Manual (Page 22)

Setting Up and Operating your FOT-5200
16 FOT-5200
User Specification (CWDM SCAN)
Set Time (Set Time)
This sets up the date and time on the
FOT-5200, and is not deleted even after
the power goes off.
You change the value by pressing ENT
after moving the selecting window using
the arrow buttons.
It is automatically saved if you press
ESC.
User Specification (CWDM SCAN)
If you press the CWDM SCAN button
(
), the display mode changes to
One Channel text view like the Power
meter button (
).
The only difference is that you
personally have to choose the
wavelength. Thus it asks you which
wavelength as in the following screens.
If you choose one from 1 to 16 and press
ENT, it shows you the corresponding channel.