Eurocom X8100 Leopard - Manual (Page 138)

Modules
7 - 2 Setting Up SATA RAID Mode
7
Setting Up SATA RAID Mode
To configure your system in Striping (RAID 0) or Mirroring (RAID 1) modes (see
Table 7 - 1, on page 7 - 3 ) you will require at least two identical (see sidebar) hard
disks.
Intel ® Matrix Storage Manager
Make sure you install the Intel Matrix driver and application if you have set up your
hard disk(s) in RAID mode (see
“Intel® Matrix Driver Installation” on page 7 - 7 ).
RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.