Echelon SmartServer XMPP Client - Manual (Page 19)

SmartServer XMPP Client Developer’s Guide 11
The default port is 5280 for the ejabberd XMPP
connection manager.
Message Domain Enter the ejabberd server domain that you specified in
step 2b in the Step 1: Configuring an XMPP Server
section. By default, this is the name of your computer.
Message Server
BOSH Path Accept the default XMPP BOSH path, which is /http-
bind. Typically, you should not have to change this.
User Name To ensure a unique user name, enter the MAC ID for
your SmartServer. You can locate the program ID from
the SmartServer hardware, a SOAP program, or the
SmartServer Web pages.
• Hardware. The MAC ID is printed on a label on
the bottom of your SmartServer
• Programmatically. The MAC ID is included in the
header of all SmartServer SOAP messages.
• SmartServer Web Pages. The MAC ID is
displayed in the System Info Web page. To open
this Web page, right-click the SmartServer host
device in the navigation pane, point to Setup, and
then click System Info.
Tip: To improve the readability of the MAC ID, enter
the hyphens between each pair of its hex digits.
Password Click Change Password. Enter and confirm the
password you specified for the administrator account in
step 2d in the Step 1: Configuring an XMPP Server
section. Click OK.
Tip: If you copied your ejabberd domain server and administrator password to a text file,
also copy and paste the MAC ID to the file. You will need the MAC ID when creating a
user for the SmartServer XMPP client on the ejabberd XMPP server.
d.
Click Submit. The SmartServer notifies the XMPP server that it is online. If you are using
an ejabberd server, the SmartServer will appear in the Online Users list after you click
Submit.