Echelon SmartServer XMPP Client - Manual (Page 18)

10 Using SmartServer XMPP
same XMPP server must be used by the SmartServer and all client applications that will
access the SmartServer.
3.
Add a message service to the XMPP server following these steps:
a.
Right-click the XMPP host entry, point to Add Service, and then click Message on the
shortcut menu.
b.
The Setup – Message Web page opens.
c.
Enter the following properties:
Message Port The port used for the XMPP connection manager. This is
determined by the configuration for the XMPP server.