EarthQuake 6040E - Manual (Page 11)

Operator's Manual
CRT Models 5040 and 6040E
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST
11
dRiVE SAFEtY ContRoL LEVERS
FoRWARd LEVER
Engages wheels forward and tines into counter rotation to
the wheels.
Pulling the drive safety control lever labeled (FORWARD)
toward the handlebar engages the wheels and tines.
Releasing the lever stops the wheels and tines and
brings the tiller to a complete stop.
REVERSE LEVER
Engages wheels into reverse and tines into counter rotation
to the wheels.
Pulling the drive safety control lever labeled (REVERSE)
toward the handlebar reverses tiller. Releasing the lever
stops the wheels and tines.
forward lever
engaged
reverse lever
engaged
reverse lever
CauTion
do not oPERAtE Both “FoRWARd” And
“REVERSE” dRiVE SAFEtY ContRoL LEVERS
At thE SAmE timE.
thiS inFoRmAtion iS PRoVidEd hERE onLY
to intRoduCE thE ContRoLS. do not
StARt thE EnGinE At thiS timE. StARtinG
And oPERAtinG inStRuCtionS ARE GiVEn
on PAGE 8. PLEASE REAd thiS SECtion And
ALL oPERAtinG And SAFEtY inStRuCtionS
BEFoRE StARtinG YouR tiLLER.
• AS A SAFEtY PRECAution, thE dRiVE SAFE-
tY ContRoL LEVERS WiLL not LoCk in thE
FoRWARd oR REVERSE PoSition.
• AS A SAFEtY PRECAution, thE REVERSE
dRiVE SAFEtY ContRoL LEVER WiLL not
LoCk in REVERSE.
• to StoP thE WhEELS And tinES At AnY
timE RELEASE thE dRiVE SAFEtY ContRoL
LEVERS oR RELEASE thE REVERSE hAndLE.
• do not oPERAtE Both thE REVERSE And
FoRWARd dRiVE SAFEtY ContRoL LEVERS
At thE SAmE timE.
WaRning
EnGinE ShouLd BE oFF BEFoRE AdjuStinG
AnY ContRoLS.
ExtREmE CAution ShouLd BE uSEd WhEn
oPERAtinG RototiLLER in thE REVERSE di-
RECtion.