Dream Property DM800 HD se - Manual (Page 44)

Pressing the Up/Down-Buttons on your remote control activates the service list. The recording continues
in the background. Once a recording is started, no matter if manually or by timer (see Chapter
5.3.3
Recording by timer
on page 39 ) it will be signaled by a note on the screen.
Is the tuner used for recording and you are trying to access a service that is not on one of the recorded
transponders you will get the “No free tuner” message.
5.3.2 Stop recording
Switch to the service which recording you want to stop.
1. Press the red Options-Button.
2. With the Navigation-Buttons ( ) choose the option “Stop recording” and press the OK-Button.
If you only have one active recording it will be stopped immediately. If more than one recording is active
you will given the choice which recording you want to stop.
5.3.3 Recording by timer
With the help of a timer you can record shows to your hard disk (if you have a hard disk installed). You
are offered two different ways to program a timer, the manual way of via the EPG.
Manual programming
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Timer” and press the OK-Button.
3. Press the green Options-Button to add a new timer.
Add Timer
You can choose between two different timer types. “Record” to record the desired show or “Zap” to
automatically switch to the service.
As repeat type you can choose between “once” and “repeated”.
The repeat type “repeated” offers you the following options:
39