Dream Property DM800 HD se - Manual (Page 43)

• 1, 2 or 4 Hours
Once you have selected the desired time press the OK-Button or the green Options-Button to get back
into the harddisk menu.
5.2.1 Initialization
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons ( ) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons ( ) choose the option “Harddisk” and press the OK-Button.
5. With the Navigation-Buttons ( ) choose the option “Initialization” and press the OK-Button.
6. With the Navigation-Buttons ( ) choose the option “ST3500820AS - Internal (488.395 GB)”
and press the OK-Button. If you have installed another hard disk this option will differ from the
one depicted!
7. By pressing the red Options-Button you will initialize (format) the hard disk. After you confirm
the safety question the initialization process starts.
!!! WARNING !!! All data stored on the HDD will be lost.
5.3 Recording
5.3.1 Instant recording
Press the red Options-Button.
You have five available options.
1. Add recording (indefinitely)
2. Add recording (stop after current event)
3. Add recording (enter recording duration)
4. Add recording (enter recording endtime)
5. Don’t record
Use the up/down-Buttons to navigate to you desired selection and press the OK-Button to select.
A ongoing recording is indicated by a flashing symbol in the Infobar (see Chapter
3.9 Infobar
on page 20 ).
During a recording you can watch another service, view a previously recorded movie or add an additional
recording.
The number of simultaneous recordings depends on the configuration of the installed tuner and on the
number of services residing on a transponder. It is possible to make up to four simultaneous recordings.
38