Dream Property DM800 HD se User Manual
Page 12
SHIFT-Setup-Button
The SHIFT/ SETUP-Button is used to preprogram the remote control to operate
a TV. (see Chapter
TV-Mode setup
on page
Standby-Button
The Standby-Button switches your Dreambox on and off. (see Chapter
Turning
your Dreambox on and off
on page
DREAM-Mode-Button
The DREAM-Mode-Button switches your remote control into Dreambox con-
trol mode. It will shortly light up once your press the button.
TV-Mode-Button
The TV-Mode-Button switches your remote control into TV control mode to control your
preprogrammed TV. It will shortly light up once your press the button. (see Chapter
TV-Mode
setup
on page
Numeric-Keypad
Enter a service number to directly access the option by using the Numeric Keypad.
The service numbers are on the left side of the service list. The Numeric Keypad can also be used to
enter the teletext page number when you are in TV-Control-Mode and if your TV is teletext capable.
The TV station has to submit teletext information; otherwise this feature cannot be used.
Arrow-Left- and Arrow-Right-Button
The Arrow-Left and Arrow-Right-Button enable you to jump
back and forth between the last 20 channels you have watched. If you have selected a sub service (see
Chapter
Sub Services
on page
) you can use these buttons to switch to the next sub service.
Additionally these buttons can be used to delete characters during text input.
Mute-Button
Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on
the TV screen. Pressing it again or pressing one of the Volume +/- Buttons brings back the audio.
The Mute-Button deletes a character during text input.
EXIT-Button
You can leave all menus and service lists by pressing the EXIT-Button.
Volume +/- Buttons
The Volume +/- Buttons control the volume of the audio. Pressing + will make
turn it up and pressing - will turn it down.
Bouquet +/- Buttons
Pressing the Bouquet +/- Buttons will jump back and forth between the bou-
quets.
INFO-Button
If no OSD menu is visible on the screen and you are in TV or RADIO-Mode, pressing the
INFO-Button
will reveal the EPG information of the chose channel if it is available.
MENU-Button
If you are in TV- or RADIO-Mode, pressing this button will bring up the OSD main menu.
The OSD main menu has the following options:
You can switch to the needed option by pressing the Navigation-Buttons (
)
. If you are in the
service list, pressing the MENU-Button brings up the service menu. The shown options may vary
depending on the service list you selected.
Navigation-Buttons
In general the menus are controlled using the Navigation-Buttons on your remote
control. To get into a submenu you have to press the OK-Button.
OK-Button
By pressing the OK-Button you confirm a selection in the menu or service list navigation. If
no OSD menu is present on your screen, the infobar is shown once you press the OK-Button.
AUDIO-Button
Pressing the AUDIO-Button gives an overview of the provided audio tracks.
7