Digiframe DF-SC5701 - Manual (Page 21)

- 17 -
9.2 The System LED light pattern
Light Description
Steadily on The scanner is ready for use.
Blinks
continuously
ƒ Initializing system and memory card. Please wait
until the initialization process is complete before
using the scanner.
ƒ Busy scanning and storing image files. Please
wait until the process is complete before
scanning another original.
ƒ Sensor cleaning in progress. Please wait until the
process is complete before performing any
operations.
2 Blinks
Paper jam. Press the Function button for about 0.5
seconds; the scanner will back out the original so
you can remove it from the input slot.
3 Blinks
Memory card error. Remove and Replace the
memory card to clear this error status.
4 Blinks Calibration failed. Error indication only.
5 Blinks
Scan to PC failed. The PC may be busy or
unavailable.
No light The scanner is powered off.