Digiframe DF-SC5701 - Manual (Page 10)

- 6 -
prevent the sheath from sticking to the photos over time.
z If the plastic sheaths are not in use, store them in a safe place
and keep them protected from accumulating dust.
3.4 Power off the scanner
After all originals are scanned, press POWER button for 2
seconds, and then disconnect the supplied AC adapter from the
scanner. Now the scanner has been safely powered off.
Important:
(1) Insert only one photo at a time, and insert the next one only
when the previous one is done. Otherwise, the scanner may
malfunction.
(2) The paper detector is quite sensitive. Please do not push your
photo or card into the feeding slot or the top of your image will be
cut/cropped. Simply let go of the photo (card) when it begins to
feed into the slot.
(3) The acceptable paper size is 2”x 2” ~ 5” x 11.8”.
(4) Do not use the following types of originals for scanning;
otherwise the scanner may malfunction or cause the original to
jam in the slot.
Originals thicker than 0.5mm
Originals with either side shorter than 55mm
Originals with lots of black or dark colors
Originals with dark colors surrounding the edges
Transparencies(filmstrips, celluloid, etc.)
Printed images (pictures on newspapers, magazines, etc.)
Soft and thin materials (thin paper, cloth, etc.)
Originals that exceed the acceptable size
(5) The scanner has a built-in cropping function that can detect
and crop the edges of an original. The max cropping size is
1.5mm per edge, as illustrated below:
Max. 1.5mm
Max. 1.5mm