Digiframe DF-SC5701 - Manual (Page 12)

- 8 -
„ After your scan, a folder with its subfolder titled
DCIM\100Photo is added to the memory card and the
scanned image will be saved in JPEG file format.
Each scanned image is given a file name with the prefix scan
followed by an underline and a 4- digit sequential number in
the order the images are stored, for example, IMG_0001.jpg,
IMG_0002.jpg. If the file name reaches IMG_9999.jpg in the
100Photo folder, a new folder titled 101Photo will
automatically be created to store subsequent new files, and so
on.
„ You can now view or copy the image files from the memory
card via your computer.
Note:
When this scanner is connected to your computer, please note
that removing/deleting the image files in the memory card from
your computer is not permitted. Instead, please plug the
memory card to your card reader or USB flash drive to your
computer’s USB port to remove these images files.
4.2 Disconnecting the scanner from a computer
„ On the Windows System Tray, click the hardware removal
icon.
„ Click the ‘Safely remove USB mass Storage device’ message
with the corresponding Drive.
„ When the ‘Safe to Remove Hardware’ message appears, you
can safely remove the scanner’s USB cable.