Cino L780BT HC - Manual (Page 9)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Getting Started
2
Preparation before Using
Install the Battery
Charging the Battery
There are 4 different power plugs in your power supply kit. Choose the appropriate local
plug and slot it onto the power adapter cavity until it is locked.
Plug the AC power plug into the appropriate AC wall socket.
Plug the DC power cord of the power supply unit into the DC power jack of the cradle.
The smart cradle will issue the power on beeps and the center indicator will give one
blue blink. If you use the charging cradle, please check the power indicator of the
charging cradle turns steady blue.
Place the scanner on the cradle. The status indicator of scanner will turn steady red if
the battery is not fully charged. When the battery is fully charged, the status indicator of
scanner will flash green at regular interval.
Please charge the new battery pack for 8 hours prior to the first use.
Ensure the battery contacts of the battery pack are facing the charging contacts inside
the battery cavity.
Slide the battery pack into the battery cavity until hearing a click sound before locking it
with the end cap. The scanner will give 4 beeps when the battery pack is installed
properly if the battery pack still has power.
Secure the end cap with the screw provided, and make sure the end cap is secured
properly before using the scanner.