Cino L780BT HC - Manual (Page 48)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
41
PROGRAM
Keyboard Interface Control
♦ Record Suffix, Preamble, Postamble & Caps Lock ♦
F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Record Suffix SS
SS
SS
SS
SS
SS None
RETURN
TAB
SPACE
ENTER (Numeric Key Pad)
User defined character (1 character) 0
1
2
3
4
5, (00-7F)
Preamble SS
MS
None
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection. FIN
[00-7F], [FIN]
Postamble SS
MS
None
1-15 characters
Maximum 15-character input; scan “FIN” to terminate this selection. FIN
[00-7F], [FIN]
Caps Lock Control SS
SS
SS “Caps Lock Off” State
“Caps Lock On” State
Auto Detect (PC/AT, PS/2, Keyboard Replacement and DOS/V Machines only) 0
1
2
Caps Lock Release Control SS
SS “Caps Lock On, Caps Off”
“Caps Lock On, Shift Off” 0
1
The function of “Caps Lock Control” and “Key Pad Emulation” are only available for IBM PC/AT, PS/VP, PS/2 series personal computers and compatible machines.
While selecting the other host interfaces, these selections don’t perform the above functions for you.
Please check the actual Caps Lock state in use while software application is running. If the Caps Lock state is off, select “Caps Lock Off” state, then FuzzyScan will
perform normal data transmission. If the Caps Lock state is on, select “Caps Lock On” state. Select “Auto Detect”, FuzzyScan will perform special transmission
handshaking without changing the status of Caps Lock switch.