Axiomtek IPC932-230-FL-ECM - Manual (Page 49)

IPC932-230-FL Series U ser’s Manual
AMI BIOS Utility 41
 Graphic Configuration
 Primary Display
Allow you to select which graphics controller to use as the primary boot device.
 Internal Graphic[Auto]
Keep IGD enable based on the setup option.
Configuration options: [Auto] [Disabled] [Enabled].
 Aperture Size [256MB]
Set Aperture Size.
Configuration options: [128MB][256MB][512MB]
 DVMT Pre-Allocated
Select DVMT pre-allocated memory size.
 DVMT Total Gfx Mem
Select DVMT total memory size.
 Gfx Low Power Mode[Disable]
This option is applicable for SFF only.
Configuration options: [Disabled] [Enabled].
 LVDS Panel Type
Use this item to select LVDS panel used by internal graphics controllerby selecting the
appropriate setup item.