Installing the pci or pcie card, 4 installing the pci or pcie card – Axiomtek IPC932-230-FL-ECM User Manual
Page 29

IPC932-230-FL Series U
ser’s Manual
Hardware Installation
21
2.4 Installing the PCI or PCIe Card
IPC932-230-FL provides one PCIex1 and one PCIex4 or 1 PCI & 1 PCIex4 for expansion. The
procedurof installing the PCI / PCIe expansion card into IPC932-230-FL is instructed below.
Step 1
Turn off the system.
Step 2
Disconnect the power connector.
Step 3
Loosen screws to remove the top cover from the chassis. Removing the PCI or PCIe
bracket by releasing the button as marked.
Step 4
Locate the PCI or PCIe slots.
Step 5
Align the PCI or PCIe card with the slot, and press the card into the slot until it is
firmly seated.
Step 6
Close the top cover back to the chassis and fasten all screws.