Avalue EBM-CX700 User Manual
Page 78
EBM-CX700 Series
78 EBM-CX700 Series User’s Manual
User Password: able to enter but no right to change the options of setup menus.
Type the password, up to eight characters in length, and press
typed now will clear any previously entered password from CMOS memory. You will be
asked to confirm the password. Type the password again and press
press
press
password will be disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you try to
enter Setup. This prevents an unauthorized person from changing any part of your system
configuration. Additionally, when a password is enabled, you can also require the BIOS to
request a password every time your system is rebooted. This would prevent unauthorized
use of your computer. You determine when the password is required within the BIOS
Features Setup Menu and its Security option (see Section 3). If the Security option is set to
“System”, the password will be required both at boot and at entry to Setup. If set to “Setup”,
prompting only occurs when trying to enter Setup