Avalue ECM-PNV - Manual (Page 57)

User ’s Manual
ECM-PNV User ’s Manual 57
3.6.2.8 APM configuration
The APM menu configures the advanced power management options.
Item Options Description
Power Management/ APM
[Enabled]
Enabled (D EFAULT )
Disabled
This item helps to select power management
mode.
Power Button Mode
On/ Off,
Suspend
This section allows you to select power button
mode.
Restore on AC Power Loss by
IO [Power off]
Power On,
Power Off (D EFAULT )
Last State
Use this to set up the system response after a
power failure.
Resume On Ring [Disabled]
Disabled (D EFAULT )
Enabled
Use this option to enable activity on the RI
(ring in) modem line to arouse the system from
a suspended or standby state.
Resume On PCIE [Disabled]
Disabled (D EFAULT )
Enabled
Use this option to enable activity on the PCIE
signal to arouse the system from a suspended
or standby state.
Resume On RTC Alarm
[Disabled]
Disabled (D EFAULT )
Enabled
Use this option to specify the time the system
should be roused from a suspend state.