AMT Datasouth Documax 5380 - Manual (Page 5)

- 5 -
User Caution
- 5 -
 Unplug this product from the power
outlet before cleaning.
 Do not use this product near water.
 Mechanical and electrical repairs
should be conduct by qualified
service personnel.
 To avoid burns, do not touch the print
head immediately after printing.
 Do not put your fingers under the tractor
covers while loading fanfold paper.
 Place the printer on a rigid,
horizontal base in a location that is
free of vibration.
 Before connecting or disconnecting
the interface cable, be sure to turn
off the printer.
 Do not connect the printer to a non-
standard power source.
 Unpack the printer. Make sure that the
printer body and all accessories are
included in the package and no parts are
damaged.
 Do not use the printer in a location
exposed to direct sunlight or close to a
heater or other heat generating
equipment
.
 Do not use the printer in a dusty location
or any location subject to sudden
changes in temperature and humidity.
Rear Operating Clearance
 Fanfold Paper: 2” plus Paper Length
 Manual Cut Sheets: Paper Length
Minus 9”
 If the case or cover becomes dirty,
clean it with a soft cloth moistened
with a small quantity of neutral
detergent diluted with water. Never
use a hard cloth or volatile solvent
such as alcohol, thinner, or benzene
.
 Take care not to twist the ribbon while
installing the ribbon cartridge.
 Never try to print without a ribbon
cartridge installed and paper loaded.
 Push the lock levers of both tractors to
the LOCK positions firmly when loading
fanfold paper.
 Do not turn off the printer during
printing, as this may lead to a
malfunction.
Operational safety
CAUTION
Cautions in setting up
CAUTION