AMT Datasouth Documax 5380 - Manual (Page 17)

- 17 -
Tractor paper tear off
When the printer leaves the factory, the tractor paper tear off function is
enabled. At the completion of a print job, the printer will feed the tractor paper
to the tear off position automatically. Paper can be torn off along the window
edge. The printer default setting can be disabled. In a disabled mode, press
the ONLINE key to advance the paper to the tear off position.
ADJUSTMENT ~
1.
After installing the tractor paper correctly and ensuring the paper select
lever is in tractor paper position .Press the LOAD/EJECT key to feed the
paper to printing position, then press the ONLINE key to enter into
offline mode, press LOAD/EJECT key to feed the paper to tear off
position. Press the ONLINE key, then press both the LOAD/EJECT and
LF/FF keys for about 3 seconds to get the printer to enter the tear-off
adjustment mode. When the printer enters this mode, the ONLINE LED
and the COPY LED blink alternately.
2.
Press the LOAD/EJECT key to adjust the distance in 1/60 inch
increments, or the LF/FF key to adjust the distance in 1/60 inch
decrements.
3.
To exit and save your new setting, press the ONLINE key. The COPY
LED and the ONLINE LED blink simultaneously twice with two beeps,
then the ONLINE LED will stay on. Your new tear-off setting value is
saved.