AMT Datasouth Documax 5380 - Manual (Page 24)

- 24 -
Printer settings via printer control panel
1.
With ribbon installed, print current settings by pressing the
LOAD/EJECT and LF/FF keys while turning ON the printer power
switch. Release keys and load cut sheet paper to print settings.
2.
Review printout. The highlighted settings (gray background) depict
current feature setting.
3.
In the online mode, press and hold the LOAD/EJECT key, and then
press the ONLINE key. Hold keys simultaneously for 3 seconds. The
ONLINE LED and COPY LED will blink twice simultaneously to indicate
MENU mode.
4.
Load cut sheet paper, the title and first MENU will print. The underlined
features are the default settings. The print head will stop at the default
setting.
5.
Key functions:
LOAD/EJECT key selects the menu option or menu setting value.
LF/FF key enters into the submenu or confirms menu setting value.
ONLINE key returns to upper menu (continue pressing the ONLINE key
will return to main menu and save new settings).
6.
Exit menu settings by cycling the printer power. Refer to next page for
menu listing and default values.
With Ethernet interface connected, the
MAC Address, DHCP status, IP Address
Subnet and Gateway will print on MENU
listing.
AMT Documax 5380 Current Settings
Use the LOAD/EJECT key to point the print head to the desired setting.
Use the LF/FF key to confirm the current setting.
Use the ONLINE key to go back the previous menu.
Press and hold the ONLINE key to save settings and exit.
Current settings are New settings will be FILLED.
MAC: XX-XX-XX-XX-XX-XX DHCP: YES IP: 10.0.0.1 Subnet: 255. 255. 255.0 gateway: 255.255.255.255
SYSTEM SETUP CHARACTER PAGE LAYOUT PRINT SETUP SERIAL I/F
BREAK PIN