Connecting the printer to the power source, Caution – AMT Datasouth Documax 5380 User Manual
Page 10
- 10 -
Connecting the printer to the power source
1.
Make sure that the power switch located on the left side of the printer is
set to OFF
. Press the “O” side of the power switch.
2.
Plug one end of the provided
power cord into the printer’s power supply
inlet.
3.
Make sure the voltage required by the printer matches that of your
electrical outlet. Refer to the voltage designated on the rating label
located on the back of the printer.
4.
Connect the other end of the power cord into a properly grounded
electrical AC outlet.
5.
To turn the printer ON
, press the “I” side of the power switch.
CAUTION
If the rated voltage doesn’t match the outlet
voltage, contact your dealer for assistance.
Do not plug in the power cord.
Power cord
打印机
Power switch
打印机
Power supply inlet
打印机
Electrical outlet