AMT Datasouth Documax 5380 - Manual (Page 23)

- 23 -
Control Panel
Indicator LED’s
Basic control panel operations
Indicator
LED
Off On Blink
ONLINE
(green)
——
Lights when the
printer is online.
The printer is
offline or error
state.
COPY
{BOLD}
(green)
The printer
is in the
normal
mode.
The printer is in
the copy 1
mode. The printer is in
the copy 2
mode.
SPEED
(green)
The printer
is in the
Letter
Quality
mode.
The printer is in
High Speed
Draft mode.
The printer is in
Super High
Speed Draft
mode.
ONLINE
LOAD/EJECT
COPY {BOLD}
LF/FF
SPEED
SETTINGS
MENU SETUP
SELF-TEST
Press the ONLINE button, switch between ONLINE and OFFLINE modes.
When offline, press LOAD/EJECT key to control cut sheet or tractor paper feeding. In cut sheet mode, if you press
LOAD/EJECT key when offline, the paper will be ejected. In tractor paper mode, with paper installed, press
LOAD/EJECT key when offline. The paper will be fed to the print home position. The printer now being in the
online mode. Press ONLINE again, then press the LOAD/EJECT key, the paper will be fed to the tear position.
Press LOAD/EJECT key one more time, the paper will reverse feed back to the ready position.
In online mode, press and hold the LOAD/EJECT key for about 3 seconds, the printer will reverse feed the paper
in micro steps.
In the offline mode, press and hold ONLINE key for 3 seconds (until beep is heard), the printer will enter quick
menu setup mode. Press LOAD/EJECT key will select the normal print mode, copy 1 print mode or copy 2 mode.
Press ONLINE key to save setting.
In the offline mode, press the LF/FF key to feed the paper line by line. Alternatively, hold the LF/FF key down, the
printer will eject the cut sheet, or feed the tractor paper one page.
In the online mode, press and hold the LF/FF key for about 3 seconds will feed the paper in micro steps.
In the offline mode, press and hold ONLINE key for 3 seconds (until beep is heard), the printer will enter quick
menu setup mode. Pressing LF/FF key will switch the printer among the letter quality mode, high speed mode and
super high speed mode. Press ONLINE key to save setting.
To print current printer settings; Press LOAD/EJECT key and LF/FF key while turning ON printer power.
In the online mode, press and hold LOAD/EJECT key, and then press the ONLINE key. Hold keys for 3 seconds.
LED’s will blink. Load paper and follow printed instructions for feature settings.
Press ONLINE key while turning ON printer power.