AMT Datasouth Documax 5380 - Manual (Page 28)

- 28 -
Ethernet Interface Settings
NetFinder search
1.
Power on the printer, connect the LAN Ethernet cable to the printer port
located on the back of the printer. Verify the Ethernet port LED indicates
a normal connection.
2.
Run NetFinder software (provided on CD shipped with the printer).
3.
Click the
“Search” button, the dialog box appearing will begin searching
automatically listing printers found in the network. The time is counting
down in the progress bar (10 seconds) and the search will finish as soon
as the time is over.
Yellow LED Green LED Description
ON Blink Connecting to network
OFF OFF Not connecting to network
Button description:
Exit
— Exit from the software
Search
— Search for printers in the same LAN
Assign IP — Modify the IP address and other settings for the specified printer.