AMT Datasouth Fastmark 400 - Manual (Page 52)

User's Guide 51
Optional Accessories
♦ Serial (RS-232) cable
♦ External media suppler (for media roll with max. 8 inch OD)
♦ Peel and Present
♦ Cutter
♦ Flash memory
♦ Font board
♦ Extension RAM ++ (0.5M for models FM402DT, FM402TT and FM403TT and 1M for the
FM403TT model)
Notes:
** : Since this printer uses band buffers technology the maximum print length depends on the
printout contents. Text and bar code printing typically allow long label lengths up to 30
inches or more. Extensive use of graphics may reduce the maximum label length to
approximately 10 inches.
++ : The Peel and Present, Cutter, expansion RAM and flash memory options are all installed at
factory. As the extension RAM, font board and flash modules use the same connector, only
one may be installed at a time.