AMT Datasouth Fastmark 400 - Manual (Page 17)

User's Guide 16
4. Insert the media spindle into core of the label media (the Retainer Disk should be on the
right).
Figure 10 - Media Spindle and Retainer Disk
5. Insert the spindle and media into the slots in the printer. The media should feed from the top
of the roll.
6. Slide the media to the far left and slide in the guide until it is snug with the media.
7. Move the Right Media guide to the far right of the printer. The Right and Left Media Guides
are located under the printhead module.
Note: The Right and Left Media Guides are 'U' shaped parts and are located at the bottom of
the paper path. Only the right media guide can be moved. The media should be
snugly positioned in the 'U' portion of the guides.
Figure 11 - Loading Media
Media guides
Media Spindle
Retainer Disk