AMT Datasouth Fastmark 400 - Manual (Page 21)

User's Guide 20
OPERATING INSTRUCTIONS
Figure 14 - Switches and Indicators
Switch, Indicators and Connections
Device name Function Usage
On/Off switch
(power switch) Controls printer
power On – normal operation
Off – loading paper and ribbon
Press once to advance a label.
Press and Hold while powering on to run Label
Sensor Calibration test.
Continue to press and hold to print out the self-
test pattern and enter into Hex mode.
FEED button Advances the media
stock to first printing
position of next label
Press to continue, when READY LED is
blinking.
READY indicator Shows the printer
status Green – printer is ready to operate
Blinking – printer is paused; press “FEED”
button to continue operation
POWER indicator Shows the power
and error status
Off – printer power off
Green – printer power on
Blinking – error has occurred
Power jack Connected to power
adapter Connected with power supply transformer plug
RS-232 serial port Communication Connected to host (RS-232 COM port), terminal
or KDU
Parallel port Communication Connected to host (Centronics )
Top cover Protects the printer
media and ribbon Lift and reach the media/ribbon compartment
Power LED
Ready LED
Feed button
Serial Port
Power Jack
Parallel Port
On Switch