AMT Datasouth Fastmark 400 - Manual (Page 2)

User's Guide 1
IMPORTANT SAFETY INSTRUCTIONS
AND OTHER NOTICES
„ This label printer complies with the requirements in Part 15 of FCC rules for a Class B or A
computing device. Operation of this equipment in a residential area may cause unacceptable
interface to radio and TV reception, requiring the operator to take whatever steps are necessary to
correct the interference.
„
Place the printer on a flat, firm and solid surface.
„ Do not place the printer near a heat source or near water.
„
Refer to the specification label on the bottom of this printer and ensure that your power source
exactly meets these requirements.
„
Do not open the printer during operation to avoid electrical shock.
„
Do not attempt to disassemble this printer if it malfunctions.
„
All rights are reserved. No part of this document may be reproduced or issued to third parties in
any form without the permission of AMT Datasouth.
„
The material in this document is provided for general information and is subject to change
without notice.
TRADEMARK CREDITS
PCL is a registered trademark of Hewlett-Packard Company
Windows, MS-Word and MS-DOS are registered trademarks of Microsoft Corporation
PC is a registered trademark of International Business Machines
Centronics is a registered trademark of Centronics Corporation
CodeSoft is a registered trademark of Techniques Avancees
BarTender is a registered trademark of Seagull Scientific Systems, Inc
LabelView is a registered trademark of Techniques Avancees
LabelMatrix is a registered trademark of StrandWare, Inc