AMT Datasouth Fastmark 400 User Manual
Page 49
User's Guide 48
Cleaning the Paper Compartment
It is recommended that the Paper Compartment be cleaned regularly if exposed to a dust
environment. This will keep dirt and dust from contaminating or damaging your printer
(Printhead and Platen).
1. Turn off the printer and open the top cover.
2. Remove paper dust by blowing using compressed air or vacuuming.
3. Clean the paper compartment with cotton, which has been moistened with mild
detergent.
Cleaning the paper sensor
It is recommended that the Paper Sensor be cleaned regularly if exposed to a dusty
environment. This will prevent false paper OUT or paper IN conditions.
1. Turn off the printer and open the top cover.
2. Remove paper dust by blowing using compressed air or vacuuming.
3. Clean the two Paper Sensor LED's with cotton stick, which has been moistened with
Isopropyl Alcohol.
Figure 19 - Paper Compartment and Paper Sensor
Paper Compartment
Paper Sensor