Alwarerc Eagle Pro V4 Camera 3-Axis 360D Panning Gimbal - Manual (Page 12)

Put the Inner Circle Assembly to the Outer Frame .
(Make sure the installation direction is correct. )
Make sure that Four Flange Bearings on the Outer
Frame is supporting the Inner Circle Assembly
tightly and correctly.
Put the 4pcs Outer Frame Rib to the Outer Frame.
Prepare the Landing Gear Ribs.
Assembly the Landing Gear Rib with Nylon parts.
(Parts No.: 10,12 for center; Parts No.: 11 for
Hexagonal Holes.)
Install the Landing Gear Rib with Frame as shown
above. (Installation direction should be the same
for both side.)
12