Alwarerc Lensman-X Public 3-Axis Gimbal (For Streak 800Pro) - Manual (Page 9)

5.0 Assembly Steps – Mounting onto Streak 800Pro
Step 1.
Prepare the Damping System (For Streak
800Pro). Step 2.
Notice the mounting holes on the X-
Mounting Frame which will be connected to
the Damping System.
Step 3.
Notice the mounting holes on the Streak
800Pro buttom Main Frame to mount the
Damping System. Step 4.
Install the Damping System onto Strealk
800Pro using 2pcs M3x30mm Screws with
3x5x20mm Collars.
Step 5.
Repeat step 4 to install the other Damping
System onto Strealk 800Pro. Step 6.
Install the X-Mounting Frame of Lensman-X
Gimbal to the Damping System on the Streak
800Pro using M3x10mm Screws.
(Apply
little amount of Thread Locker when
assembly metal to metal parts.)
Page 9