Alwarerc Lensman-X Public 3-Axis Gimbal (For Streak 800Pro) - Manual (Page 19)

7. Camera CG Adjustment
Step 1.
Remove 3pcs Screws from the Tilt Servo. Step 2.
Close view of step1.
Step 3.
Rotate the Tilt Servo downward to disconnect
the servo gear away from the main gear. So
the Tilt Axis can be move freely now for the
CG adjustment with your camera. Step 4.
Remove 3pcs Screws from the Roll Servo.
Step 5.
Close view of step 4. Step 6.
Rotate the Roll Servo downward to
disconnect the servo gear away from the
main gear. So the Roll Axis can be move
freely now for the CG adjustment with your
camera.
Page 19