Alwarerc Lensman-X Public 3-Axis Gimbal (For Streak 800Pro) - Manual (Page 15)

Step 7.
Install the O-ring Damping System onto the
Lower Main Frame of Streak 1000 using 2pcs
M3x10mm Screws and Self-Lock Nuts. Step 8.
Back view of the O-ring Damping System.
Step 9.
Repeat step 6-8 to install the rest of Damping
System. Step 10.
Notice the mounting holes on the O-ring
Damping System which will be connected
with X-Mounting Frame.
Step 11.
Notice the mounting holes on the X-
Mounting Frame which will be connected
with the O-ring System. Step 12.
Install the Lensman-X Gimbal to the O-ring
Damping System which is mounted on the
Streak 1000 using 8pcs M3x10mm Screws.
(Apply little amount of Thread Locker to the
screws before installation.)
Page 15