Alwarerc Lensman-X Public 3-Axis Gimbal (For Streak 800Pro) - Manual (Page 21)

Step 7.
1/4 x 13mm Camera Screw on the Camera
Stand Frame is used to secure standard DSLR
Cameras. Step 8.
Install your Camera onto the Camera Stand
Frame using the 1/4x13mm Camera Screw.
Step 8.
Back view. Step 9.
Adjust the CG for Tilt Axis by adjusting the
position of the camera on the Camera Stand
Frame.
Step 10.
Adjust the CG for the Roll Axis by adjusting
the position of the whole Camera Mount
Assembly. Step 11.
Adjust the CG for Pan Axis by adjusting the
position of the whole Lower Gimbal Part.
Page 21