Alwarerc Lensman-X Public 3-Axis Gimbal (For Streak 800Pro) - Manual (Page 7)

Step 7.
Insert the Tilt-Roll Assembly into the Boom
Connection Assembly. Step 8.
Adjust the position of the Tilt-Roll-
Assembly and seucre it with a M3x6mm
Screw.
(Apply little amount of Thread Locker
when assembly metal to metal parts.)
Step 9.
Secure the Tilt-Roll Assembly onto the
Boom Connection Assembly completely
using 2pcs M3x20mm Screws.
(Apply little
amount of Thread Locker when assembly
metal to metal parts.)
Step 10.
Prepare the Tripod Landing Gear Assembly.
Step 11.
Insert the Tripod Landing Gear Assembly to
the booms on the Pan Asix Mechanism. Step 12.
Adjust the position of the Tripod Landing
Gear Assembly as to parallel to the Panning
Gear.
Page 7