Alwarerc Lensman-X Public 3-Axis Gimbal (For Streak 800Pro) - Manual (Page 12)

Step 7.
Notice the mounting holes on the O-ring
Damping System which will be connected
X-Mounting Frame. Step 8.
Notice the mounting holes on the X-
Mounting Frame which will be connected to
the O-ring Damping System.
Step 9.
Install the O-ring Damping System to the X-
Mounting Frame using 8pcs M3x 10mm
Screws.
(Apply little amount of Thread
Locker to the screws before installation.)
Step 10.
Close view of step 9.
Step 11.
Top view of complete assembly.
Page 12