beautypg.com

Ahci configuration, Ahci port 0/1/2 – ADLINK ReadyBoard 740 User Manual

Page 43

background image

BIOS Setup

31

RB-740

AHCI Configuration

You can use this screen to select options for the AHCI Configura-
tion settings. Use the up and down < Arrow > keys to select an
item. Use the < + > and < - > keys to change the value of the
selected option. The settings are described on the following
pages. The screen is shown below.

AHCI Port 0/1/2

Displays the SATA drives installed on AHCI channels. Shows
“Not Detected” if no drive installed.

See also other documents in the category ADLINK Hardware: